EN ISO 105-C08-2008 纺织品.色牢度试验.第C08部分:用含有低温漂白活性剂的非磷酸参考染色剂测定家庭和商业洗涤色牢度

作者:标准资料网时间:2024-05-20 16:22:43 浏览:9528 来源:标准资料网

【英文标准名称】:Textiles-Testsforcolourfastness-PartC08:Colourfastnesstodomesticandcommerciallaunderingusinganon-phosphatereferencedetergentincorporatingalowtemperaturebleachactivator(ISO105-C08:2001+Amd1:2006)(includesAmendmentA1:2008);Eng
【原文标准名称】:纺织品.色牢度试验.第C08部分:用含有低温漂白活性剂的非磷酸参考染色剂测定家庭和商业洗涤色牢度
【标准号】:ENISO105-C08-2008
【标准状态】:现行
【国别】:
【发布日期】:2008-09
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:漂白剂;漂白坚牢度;色牢度;色牢度试验;商业的;洗涤剂;染料;家用亚麻织物;材料测试;方法;规程;基准方法;温度试验;试验清洁剂;试验设备;测试;测试条件;纺织材料
【英文主题词】:Bleaches;Bleachingfastness;Colourfastness;Colour-fastnesstests;Commercial;Detergents;Dyes;Householdlinen;Materialstesting;Methods;Procedures;Referencemethods;Temperaturetest;Testdetergent;Testequipment;Testing;Testingconditions;Textiles
【摘要】:
【中国标准分类号】:W70
【国际标准分类号】:59_080_01
【页数】:16P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: EN ISO 3759-2008 纺织物.测定尺寸变化试验用纺织物样品和服装的制备、标记和测量
下一篇: EN 716-1-2008 家具.家用儿童帆布床和折叠床.第1部分:安全要求

【英文标准名称】:Petroleumandrelatedproducts-Determinationoftheageingbehaviourofinhibitedoilsandfluids-TOSTtest-Part3:Anhydrousprocedureforsynthetichydraulicfluids(ISO4263-3:2006);EnglishversionofDINENISO4263-3:2006-05
【原文标准名称】:石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第3部分:合成水压的无水程序(ISO4263-3:2006)
【标准号】:DINENISO4263-3-2006
【标准状态】:作废
【国别】:德国
【发布日期】:2006-05
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:老化性能;老化;防腐蚀;密度;测定;液压液;非溶物质测定;材料试验;矿物油;油;抗氧化;石油产品;pH值;高压液体;合成的;试验设备;试验;无水
【英文主题词】:Ageingbehaviour;Ageing(materials);Corrosionprotection;Density;Determination;Hydraulicfluids;Insolublematterdetermination;Materialstesting;Mineraloils;Oils;Oxidationresistance;Petroleumproducts;pH;Pressureliquids;Synthetic;Testequipment;Testing;Waterless
【摘要】:Thisstandardspecifiesananhydrousprocedureforthedeterminationoftheageingbehavioursynthetichydraulicfluids.
【中国标准分类号】:E30
【国际标准分类号】:75_120
【页数】:27P.;A4
【正文语种】:德语

Product Code:SAE MA1943
Title:Nuts, Self-Locking, UNS N07001, 760 掳C, 1100 MPa and 1210 MPa, Procurement Specification For, Metric
Issuing Committee:E-25 General Standards For Aerospace And Propulsion Systems
Scope: This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) type of nuts made from a corrosion and heat resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 120 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 degrees C.