JC/T 879-2001 水泥工业用离心通风机技术条件
作者:标准资料网 时间:2024-05-19 06:17:59 浏览:9529
来源:标准资料网
基本信息
标准名称: | 水泥工业用离心通风机技术条件 |
英文名称: | Technical condition centrifugal ventilator for cement industry |
中标分类: |
建材 >>
建材机械与设备 >>
水泥与水泥制品设备 |
ICS分类: |
|
替代情况: | 被JC/T 879-2011代替 |
发布部门: | 国家建筑材料工业局 |
发布日期: | 2001-02-20 |
实施日期: | 2001-10-01 |
首发日期: | 1900-01-01 |
作废日期: | 2012-07-01 |
提出单位: | 国家建材局建材机械标准化技术委员会 |
归口单位: | 国家建材局建材机械标准化技术委员会 |
起草单位: | 吉林四平鼓风机厂 |
起草人: | 曲晓秋、施云蛟、廖玉龙、李文英、杨国军、宋艳玲 |
出版社: | 中国标准出版社 |
出版日期: | 1900-01-01 |
页数: | 6页 |
适用范围
本标准规定了水泥工业旋窑生产线中窑尾、窑头、煤磨、水泥磨、蓖冷机等设备所配套的离心通风机的技术要求、试验方法、检验规则及标志、包装、运输和贮存。
本标准适用于含尘浓度不大于100g/m3(标态)的离心通风机〔以下简称“风机”) 蓖冷机冷却机含尘浓度应不大于150 mg/m3(标态),其他风机也可参照使用。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 建材 建材机械与设备 水泥与水泥制品设备
Product Code:SAE AMS6476
Title:Steel, Bars, Forgings, and Tubing, 0.50Cr 0.12Mo (0.89 1.01C)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope: This specification covers a low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for bearing components requiring a through-hardening steel usually with hardness of approximately 60 HRC and section thickness under 0.50 inch (12.7 mm), but usage is not limited to such applications. UNS Number: K19526【英文标准名称】:StandardTestMethodsandDefinitionsforMechanicalTestingofSteelProducts
【原文标准名称】:钢制品机械试验的标准试验方法和定义
【标准号】:ASTMA370-2003
【标准状态】:作废
【国别】:美国
【发布日期】:2003
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:延伸;钢产品;机械试验;钢;FATT;抗拉强度;摆式冲击试验;布氏硬度;洛氏硬度;屈服强度;硬度试验;定义
【英文主题词】:steels;yieldstrength;definitions;definition;steelproducts;tensilestrength;fatt;charpyimpacttests;hardnesstests;mechanicaltesting;brinellhardness;rockwellhardness;elongation
【摘要】:
【中国标准分类号】:H22
【国际标准分类号】:77_040_10;77_140_01
【页数】:48P;A4
【正文语种】:英语