GB/T 22598-2008 水处理化学品 铅含量测定方法
作者:标准资料网 时间:2024-05-19 00:43:22 浏览:8124
来源:标准资料网
基本信息
| 标准名称： | 水处理化学品 铅含量测定方法 |
| 英文名称： | Water treatment chemicals - Determination of lead content |
| 中标分类： |
化工 >>
化学助剂、表面活性剂、催化剂、水处理剂 >>
水处理剂基础标准与通用方法 |
| ICS分类： |
化工技术 >>
分析化学 >>
化学分析
|
| 发布部门： | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
| 发布日期： | 2008-12-23 |
| 实施日期： | 2009-09-01 |
| 首发日期： | 2008-12-23 |
| 作废日期： | |
| 主管部门： | 中国石油和化学工业协会 |
| 提出单位： | 中国石油和化学工业协会 |
| 归口单位： | 全国化学标准化技术委员会水处理剂分会(SAC/TC 63/SC 5) |
| 起草单位： | 中海油天津化工研究设计院 |
| 起草人： | 李琳、邵宏谦、白莹 |
| 出版社： | 中国标准出版社 |
| 出版日期： | 2009-09-01 |
| 页数： | 8页 |
| 计划单号： | 20079336-T-606 |
适用范围
本标准规定了水处理化学品中铅含量的方法原子吸收光谱法。
本标准适用于所取水处理化学品试液中铅含量在0.5μg～9.0μg范围内的测定。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T602 化学试剂 杂质测定用标准溶液的制备(GB/T602-2002,ISO63531:1982,NEQ)
GB/T6682 分析实验室用水规格和试验方法(GB/T6682-2008,ISO3696:1987,MOD)
所属分类： 化工 化学助剂 表面活性剂 催化剂 水处理剂 水处理剂基础标准与通用方法 化工技术 分析化学 化学分析
【英文标准名称】:Processmeasurementandcontroldevices-Generalmethodsandproceduresforevaluatingperformance-Part4:Evaluationreportcontent
【原文标准名称】:过程测量和控制装置.性能评定用一般方法和程序.第4部分:评定报告的内容
【标准号】:IEC61298-4-2008
【标准状态】:现行
【国别】:国际
【发布日期】:2008-10
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:IEC/SC65B
【标准类型】:()
【标准水平】:()
【中文主题词】:自动化;含量;控制装置;控制设备;控制系统;电气工程;评估单;评估;工业流程测量;测量仪器;方法;观察;工作性能;电功率测量;过程;过程控制;报告;试验报告;试验
【英文主题词】:Automation;Contents;Controldevices;Controlequipment;Controlsystems;Electricalengineering;Evaluationsheet;Evaluations;Industrialprocessmeasurement;Measuringinstruments;Methods;Observation;Performanceinservice;Powermeasurement(electric);Process;Processcontrol;Reports;Testreports;Testing
【摘要】:ThispartofIEC61298specifiesgeneralmethodsandproceduresforconductingtests,andreportingonthefunctionalandperformancecharacteristicsofprocessmeasurementandcontroldevices.Thetestsareapplicabletoanysuchdevicescharacterizedbytheirownspecificinputandoutputvariables,andbythespecificrelationship(transferfunction)betweentheinputsandoutputs,andincludeanalogueanddigitaldevices.Fordevicesthatrequirespecialtests,thisstandardshouldbeused,togetherwithanyproductspecificstandardspecifyingspecialtests.Thisstandardspecifiesthecontentofthewrittenreportontheevaluationortestsonaprocessmeasurementorcontroldevice,andtheresultsobtained.Itspecifiesthemajoritemswhichshouldbeincludedintheevaluationreport,butitdoesnotspecifytheexactformatinwhichthecontentsshouldbepresented.(Thisislefttothediscretionofthetestlaboratorywhichpreparesandissuesthereport.)
【中国标准分类号】:N18
【国际标准分类号】:25_040_40
【页数】:25P;A4
【正文语种】:英语
Product Code:SAE J1942/1
Title:Qualified Hoses for Marine Applications
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:Effective August 28, 1991, the SAE replaced the USCG as the listing agency for Marine Hose Assemblies. The previous USCG list was discontinued as of December 31, 1992, and is being replaced by this SAE listing, J1942-1.All products appearing on the USCG list as of December 31, 1992, may be carried over to the SAE J1942-1 provided they meet the new test requirements listed in SAE J1942.If your products comply, you may retain your listings with no additional testing. (Please note that the USCG has the authority to request and inspect your test results at their discretion.)The following list consists of hose data provided as of May 2003, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25(c). Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP or type of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document.Manufacturers wishing to list their products in this document shall:a. Successfully test their hose to the requirements of SAE J1942, Table 1.b. Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested. All sizes should be included in the same letter which must also include all of the information necessary to make a SAE J1942-1 listing.c. The SAE will review the letter and may, at their discretion, request to see some, or all, of the test results. A copy of the submittal letter marked 驴Accepted For Listing驴 will be returned to the applicant and a duplicate copy sent to the USCG.d. The cutoff date for inclusion of a hose listing in the annual SAE Handbook is April 30, of the preceding year. However, listed hoses may be used on vessels as soon as the 驴Accepted For Listing驴 letter is issued by the SAE.Next publication of this listing is scheduled to take place on December 2003. If you wish to include additional hoses in the 2003 publication of this list, please submit your Certified List to SAE Headquarters by October 2003.
